User guide

24
Chapter 3, Using Your Matrox MC-100 Hardware
Saving option settings
The SAVE SETTINGS menu allows you to save the currently selected input,
output, and 3D settings to one of four available DIP switches (DIP switches 5 to
8) so that you can quickly set the appropriate settings for a particular workflow
by simply turning the corresponding DIP switch ON. See “Using the MC-100
DIP switches” on page 10 for more information. The
SAVE SETTINGS menu
also allows you to restore the settings for the MC-100 options back to factory
defaults.
¦NoteMC-100 can have only one user-defined preset loaded at any given time.
This means that if a DIP switch associated with a user-defined preset is ON, you
must turn it OFF before loading another preset.
°To save option settings to a DIP switch:
1 Access the Matrox MC-100 on-screen display (OSD) main menu.
2 Select SAVE SETTINGS from the OSD main menu.
3 Select the DIP switch to which you want to save the current MC-100
settings.
Resetting the DIP switches to factory defaults
To restore the settings for the MC-100 options back to factory defaults, select
FACTORY DEFAULT in the SAVE SETTINGS menu.
¡ Important This action cannot be undone.