User guide

Chapter 3, Using Your Matrox MC-100 Hardware

Specifying your output settings

The OUTPUT menu allows you to select the video signal for a given output

connector, as well as the HDMI audio channels. The output signal also includes

the ancilliary data contained in the input video signal. If you select

3D or

Analysis, the ancilliary data that is output is from channel 1 only.

°To set the output settings:

1 Access the Matrox MC-100 on-screen display (OSD) main menu.

2 Select OUTPUT from the OSD main menu.

3 For the SDI and HDMI outputs, select SDI 4, SDI 3, or HDMI, and then

select your desired output setting. For information on the MC-100 channels,

see “MC-100 channel definitions” on page 11.

Remarks

• PsF input video signals are not supported on the HDMI output. For SDI

outputs, PsF input video signals are only supported in bypass mode.

• You must have two input channels for the 3D, Analysis, and Multiplex

option settings to function properly.

• 3D and Analysis output settings are not supported for 3G level A input

signals.

• Multiplex is not supported on the HDMI output or for 3G level A input

signals.

• In order to view the selected video output format, the format must be

supported by your SDI or HDMI display device. If the format is not

supported, a purple screen is displayed and the OSD is available if the