User guide

8
Chapter 2, Connecting External Devices to Matrox MC-100
Connecting input and output devices
The Matrox MC-100 unit supports two SDI input sources via two BNC input
connectors, two SDI output devices via two BNC output connectors, and one
HDMI output device. For a list of the supported input and output formats, see
Appendix A, “Matrox MC-100 Supported Output Formats,” on page 25.
¡ Important If you’re connecting two input sources to MC-100, the input
sources must be the same video format.
²Caution Using a low-quality HDMI cable can damage the HDMI connector on
the Matrox MC-100 unit.
To SDI input
sources
To SDI output
devices
To HD MI
output device
OSD buttons
(see “Using the OSD
buttons” on page 14)
Power
(see “Powering Matrox
MC-100” on page 6)
Mini USB Type B port
(see “Updating your MC-100
hardware” on page 2)
Infrared sensor (not used)
MC-100
MC-100