User guide

28 Matrox Marvel – User Guide
9 Restore your original display settings (see steps 4 and 5).
2
Cause
Files on your system may have been deleted or corrupted.
1
Solution
After you’ve made sure that your Matrox hardware is properly installed, try removing the
current display drivers, then install Matrox display drivers:
Windows 95/98 –
1 If your display is currently unusable, press [Ctrl]+[Alt]+[Del] twice to restart your
computer. Otherwise, click
Æ Shut Down Æ Restart the computer .
2 Before Windows starts, press [F8] to see a startup menu. (With Windows 98, if [F8]
doesn’t work, instead try pressing and holding [Ctrl].)
3 Select the number for “safe mode”, then press [Enter].
4 If an old version (before version 5. x ) of Matrox PowerDesk software is installed, remove
it: click
Æ Settings Æ Control Panel Æ Add/Remove Programs (double-click) Æ
Matrox PowerDesk Æ Add/Remove Æ Complete Uninstallation Æ OK .
5 To switch to a standard (VGA) display driver, right-click your Windows desktop
background, then click
Properties Æ Settings , then:
ƒ If you see the Advanced Properties button, click Advanced Properties Æ Change Æ
Show all devices Æ Standard display types Æ Standard Display Adapter (VGA) Æ
OK Æ Close Æ Close Æ Yes .
ƒ If you see the Change Display Types button, click Change Display Types Æ Change
(Adapter)
Æ Show all devices Æ Standard display types Æ Standard Display
Adapter (VGA)
Æ OK Æ Close Æ Close Æ Yes .
ƒ If you see the Advanced button, click Advanced Æ Adapter Æ Change Æ Next Æ
Display a list of all the drivers... Æ Next Æ Show all hardware Æ Standard display
types
Æ Standard Display Adapter (VGA) Æ Next Æ Yes Æ Next Æ Finish .
6 Install the latest Matrox display drivers for your graphics card – run the setup program,
then follow the on-screen instructions.
Note: In multi-display mode (Windows 98 only), each display has its own monitor settings
(refresh rates).
9x9x