User guide

24 Matrox Marvel – User Guide
To use TV output
*
Windows 98 – To add a TV to your Windows desktop, see “DualHead Multi-Display setup”,
page 22.
Windows 95/98 – You can use the DualHead Clone , DualHead Zoom , or DualHead DVDMax
features (see “Other DualHead features”).
To adjust TV settings, access the Matrox PowerDesk
DualHead property sheet (see
“Accessing PowerDesk property sheets”, page 21). To adjust advanced desktop TV settings,
click
Desktop TV Settings . To adjust advanced DVDMax TV settings, click DVDMax TV
Settings
.
For more information on how you can use your secondary display, see PowerDesk online
help.
More PowerDesk information
For more information on Matrox PowerDesk:
Windows 95/98 –
„ Access the PowerDesk Information property sheet (see “Accessing PowerDesk property
sheets”, page 21), then click
Help or View Readme File .
„ Where available, see the PowerDesk context-sensitive help. (Some help topics are only
available through context-sensitive help.)
* To enable TV output support for DOS display modes, use
Matrox System Utilities
. You can install this software from your Matrox
installation CD-ROM. For more information, see the
Readme
file included with this software.
Note: With the DualHead Clone feature (Windows 95/98), you can avoid using TV settings
with your computer monitor. You can do this by enabling the
Keep optimal refresh when
possible
check box on the DualHead Clone Options dialog box.
9898
9x9x
9x9x