User guide

22 Matrox Marvel – User Guide
3 If the monitor name listed doesn’t match your monitor, click the Change button to select
a new monitor name. Follow the on-screen instructions.
For more information on Windows monitor settings, see Windows documentation.
If you want to customize your Windows monitor settings:
1 Access the PowerDesk Monitor Settings property sheet (see “Accessing PowerDesk
property sheets”, page 21).
2 Depending on what you want to do, click one of the buttons in the Monitor settings
selection method
box, then follow the on-screen instructions.
DualHead Multi-Display setup
Your Matrox graphics card allows you to enable a second display (a TV) as part of your Windows
desktop. This is the Matrox
DualHead Multi-Display feature. To use this feature:
Windows 98 –
1 Access the PowerDesk DualHead property sheet (see “Accessing PowerDesk property
sheets”, page 21).
2 Select the DualHead Multi-Display option button.
3 Click OK Æ Yes to restart your computer and for changes to take effect.
4 If multi-display mode isn’t automatically enabled when you restart Windows:
a Right-click your Windows desktop background, then click Properties Æ Settings .
b Select the disabled display, enable the Extend my Windows desktop onto this
monitor
check box, then click OK .
Notes:
„ If you’re using BNC connectors with a Plug-and-Play monitor, the Plug-and-Play
feature of your monitor can’t be used. To use the Plug-and-Play feature of your monitor,
instead of the BNC connectors, use the 15-pin connector at the back of your monitor.
„ In Windows 95/98, Matrox monitor settings are based on Windows monitor settings. If
you change your Windows monitor settings, you may have to reselect or readjust your
Matrox monitor settings.
„ In multi-display mode (Windows 98 only), each display has its own monitor settings
(refresh rates).
9x9x
9898
9898