User guide

18 Matrox Marvel – User Guide
Output to TV through
your video recorder
If you want to view computer video
on your TV
and record it on your
video recorder, you can connect
through your video recorder. There
are two ways to do this: you can use
line connectors (composite, S-video
or SCART) or antenna/cable TV
connectors. A line connection is
higher quality, but some TVs only
have an antenna or cable TV input
connector.
To use line connectors:
1 Connect your computer output to your video recorder input (see steps 2 and 4 starting
on page 10).
2 Make sure your video recorder TUNER/LINE input switch is set to LINE .
3 Connect your video recorder’s VIDEO OUT and AUDIO OUT to your TV’s VIDEO IN and
AUDIO IN .
4 If your TV has a TV/VIDEO input switch, set it to VIDEO .
To use antenna or cable TV connectors:
1 Connect your computer output to your video recorder input (see steps 2 and 4 starting
on page 10).
2 Make sure your video recorder TUNER/LINE input switch is set to LINE .
3 Connect your video recorder’s antenna or cable output to your TV antenna/cable input.
4 If your TV has a TV/VIDEO input switch, set it to TV .
5 North America only: Change the channel on your TV to 3 or 4, depending on how the
CHANNEL switch on your video recorder is set.
For more information, see your video recorder and TV manuals.
TV
Video recorder