User guide

12 Matrox Marvel – User Guide
4
Connect Marvel
audio/video output
Use one of the two composite (RCA)
audio/video cables supplied with
Matrox Marvel.
a Plug the yellow, white and red
connectors on one end of the cable
to the connectors of the same color
on the
back of the Marvel
connector box.
b Connect the other end of the cable
to the
VIDEO IN and AUDIO IN (left
and right) connectors on your TV
or video recorder. If your video
device has only one audio
connector, use the left audio
connector on the cable.
If you connect to a video recorder and
you want to see your computer output
on a TV, connect your TV to your
video recorder. For more information,
see “Matrox Marvel output”, page 17.
Note: If your video recorder or TV only uses a SCART audio/video
connector (see picture), you may need to purchase a SCART video
connector. For more information, see “SCART information”,
page 15.
Video recorder
or TV