User guide

10 Matrox Marvel – User Guide
Quick connection setup
1
Connect computer
monitor
a
Plug the cable for your computer
monitor into the blue connector
on your Matrox card.
b
Make sure the other end of the
monitor cable is properly
connected to your monitor.
2
Connect Marvel cable
Use the special cable included with
your Marvel card.
a
Plug the end labeled TO MARVEL
board
into your Marvel card.
b
Plug the end labeled AUDIO OUT
into the
LINE IN connector on your
sound card.
c
Plug the end labeled AUDIO IN into
the
LINE OUT connector on your
sound card.
*
d
Plug the other end into the Marvel
connector box.
* If your sound card has no
LINE OUT
connector, you can use its
SPKR
connector instead. In this case, all your computer sound
output goes to the video device you connected to.