User guide

6 Matrox Maevex 5100 Series – User Guide
Hardware supplied
*
 Maevex 5150 Encoder – Encoder unit, 1 power supply, 1 DVI to HDMI adapter, 1 CAT
5e network cable (6 ft/1.8 m), 1 analog audio cable.
 Maevex 5150 Decoder – Decoder unit, 1 power supply.
Software available
 Matrox PowerStream – to use your Matrox graphics hardware. Matrox provides 32-bit
and 64-bit versions of the software. Matrox PowerDesk software supports Windows® 8
†
,
Windows® Server® 2012, Windows® Server® 2012 R2, Windows® 7, and Windows®
Server® 2008 R2.
Hardware required (sold separately)
Maevex 5150 Encoder –
 Shielded HDMI cable (Source to encoder unit)
Maevex 5150 Decoder –
 Network cable (CAT 5, 5e, 6, or 7)
 Shielded HDMI cable
Optional hardware (sold separately)
Depending on your connection setup, you may also need any of the following hardware:
Maevex 5150 Encoder –
 Network cable (CAT 5, 5e, 6, or 7)
 Shielded HDMI cable (Encoder unit to monitor)
 VGA cable
 Analog audio cable (Audio out)
Maevex 5150 Decoder –
 Analog audio cable (Audio out)
 DVI to HDMI adapter
* The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more
information, contact your Matrox representative.
† For more information on the Windows 8 operating systems supported, see the Matrox driver release notes for this product.