User guide

Matrox Maevex 5100 Series – User Guide 51
Right side mount
Mounting your Maevex decoder units on VESA mounts
You can mount your Maevex decoder units on VESA compliant mounts (75, 100, or 200 mm) or on
the back of devices with VESA compliant mounting holes.
 To mount your decoder unit on a VESA mount, you need two (2) angled brackets (kit
sold separately).
 Your Maevex decoder unit has two (2) mounting holes on each side. Use four (4) 6 mm
M3 screws (included in your kit) to secure each unit to the angled brackets.
 If a decoder is attached to a VESA mount, no other device can use that VESA mount.