User guide

Matrox Maevex 5100 Series – User Guide 49
Maevex encoder
 Your Maevex encoder unit has two (2) mounting holes under its casing. Use two (2)
6 mm M3 flat-head screws (included with your mounting shelf ) to secure each unit. You
need to remove the four (4) rubber pads under your encoder unit before you can secure
your unit to the shelf.
Maevex decoder
 Your decoder unit has two (2) mounting holes on each side. To mount your decoder
horizontally, you need two (2) angled brackets (kit sold separately).
 To secure the angled brackets to your unit and to the shelf, use six (6) 6 mm M3 flat-head
screws (included in your kit).