User guide

46 Matrox Maevex 5100 Series – User Guide
Maevex units
The following are the requirements for a network firewall present on a network with a Maevex
environment.
Accessing your Windows Firewall settings
To access your Windows Firewall settings:
Windows 8/7 –
1 Windows 8 – From the Start screen, go to All Apps Æ Windows System Æ Control Panel
Æ Network and Internet * Æ Network and Sharing Center *. (* Depending on your
configuration, these steps may be unnecessary.)
Windows 7 – Click Control Panel Æ Network and Internet * Æ Network and Sharing
Center
*. (* Depending on your configuration, these steps may be unnecessary.)
2 In the left panel, click Windows Firewall Æ Advanced Settings .
Network Ports Type Inbound Outbound Functionality
20,21 TCP 9 — FTP: Failsafe file upload
22
*
* Minimum requirements
TCP 99SSH: Firmware update
69 UDP — 9 DHCP: DHCP client
123 UDP 99NTP: Network Time Protocol
443
*
TCP 9 —
HTTPS: PowerStream commands and
Firmware Updater Authentication
1900
*
UDP 99
UPnP: Microsoft SSDP for discovery of
UPnP devices
Ephemeral
*
UDP 99
RTP/RTCP: Audio and video streams
and control
8554
*
TCP 99RTSP: Streaming (configurable)
†
† For more information, see the encoder Stream to network settings in the Matrox PowerStream online help.
12000 TCP 99RS232: RS232 virtualization
Note: You may need administrator rights to modify your Windows Firewall settings. For
more information, see Windows documentation or contact your system administrator.