User guide

44 Matrox Maevex 5100 Series – User Guide
Networking support
 IPv4 support
 100/1000 Base-T Ethernet
 Streaming protocol: RTSP (RTP, RTCP, and UDP) unicast and multicast
 Required command and control network protocols: TCP/IP, UPnP, and HTTPS
 CAT 5, 5e, 6, and 7 cables
Notes
 Your Matrox product supports EDID v1.3 (monitor settings) and DDC-2B
(Plug-and-Play monitor).
 The display resolutions available depend on your monitor and PowerStream settings. For
information on the capabilities of your monitor, see your monitor documentation.
 If a decoder uses a stream from an encoder located on a different subnet, the quality of
the video output from the decoder may be degraded.
 Playback of content with different audio sampling rates may cause issues with third-
party players (such as VLC).
 Network performance and features may vary depending on your networking equipment.
For more information, contact your networking equipment vendor.
 When transmitting in multicast on a large network, we recommend using a router with
IPv4 multicast addressing support and switches with IGMP v2 support.
 Video capture and streaming of protected content isn’t supported.
 Slow response from certain routers may cause a slow PowerStream startup.
Digital flat panel and source compatibility
 HDMI compatible
 DVI 1.0 compatible (using HDMI to DVI-D adapter)