User guide

32 Matrox Maevex 5100 Series – User Guide
3 Click Inbound Rules .
4 In the Actions panel, click New Rule . Configure the new rule with the following settings:
 Rule – Select Custom .
 Program – Select All programs .
 Protocol and Ports – Next to Protocol , select TCP . Next to Local port , select Specific
ports
. For the port number, enter 445 . Next to Remote port , select All Ports .
 Scope – Under the remote IP address, add the IP range you want to use for your
encoders. You can use a range (such as
192.168.1.0/24 ) or a single IP address (such
as
192.152.168.62 ).
 Action – Select Allow the connection .
 Profile – Select the network location of your system ( Domain , Private , or Public ).
 Name – Enter the name for your rule (such as Maevex Encoder Recording - TCP rule ).
5 In the Actions panel, click New Rule . Configure the new rule with the following settings:
 Rule type – Select Custom .
 Program – Select All programs .
 Protocol and Ports – Under Protocol type , select ICMPv4 .
 Scope – Under the remote IP address, add the IP range you want to use for your
encoders. You can use a range (such as
192.168.1.0/24 ) or a single IP address (such
as
192.152.168.62 ).
 Action – Select Allow the connection .
 Profile – Select the network location of your system ( Domain , Private , or Public ).
 Name – Enter the name for your rule (such as Maevex Encoder Recording - ICMPv4
rule
).
For more information on configuring your Windows firewall, see your network
administrator.
Problem Wrong color balance
1
Cause The local output settings of your encoder or decoder unit may be improperly set.
1
Solution Adjust your PowerStream settings. Check your Image appearance settings (brightness,
contrast, and so on).