User guide

Matrox Maevex 5100 Series – User Guide 15
If your video source has a DVI connector, use the DVI to HDMI adapter included with your
Maevex product to connect your video source to your encoder unit.
2 Connect to your network
Connect a network cable to the LAN 1
connector on your encoder unit.
3 Connect your analog audio
input (optional)
Connect the analog audio output of your
video source to the
Line In () connector
on your encoder unit.
4 Connect your video output
(optional)
If you’re connecting a digital monitor to
your unit, connect the monitor cable to the
HDMI Out connector on your encoder unit.
If your monitor doesn’t support HDMI
output, use an HDMI adapter to connect it
to your encoder unit.
Note: To connect a source to this connector, you need a shielded HDMI cable.
If your video source uses a display resolution higher than 720p60, we recommend you use
a certified high-speed HDMI cable.
Network
cable
Audio cable
HDMI monitor
cable