User guide

32 Matrox M-Series – User Guide
2
Cause Audio cables may be loose or incorrectly wired.
1
Solution Make sure your sound card cables are properly connected .
3
Cause Your sound card’s Windows software settings may be incorrect. Specifically, input or output
may be disabled, or volume levels may be too low or too high.
1
Solution Make sure your sound card’s Windows software settings are correct.
Windows 2000/XP –
1 Double-click the speaker icon ( or ) on the Windows taskbar.
If you don’t see the speaker icon:
Windows 2000 –
a Click Start Æ Settings Æ Control Panel .
b Double-click the Multimedia or Sounds and Multimedia icon.
c Enable “ Show volume control on the taskbar ”.
d Click OK .
e Double-click the speaker icon on the taskbar.
Windows XP –
a Click Start Æ Settings * Æ Control Panel Æ Sound, Speech, and Audio Devices * Æ
Sounds and Audio Devices (double-click*). (* Depending on your configuration of
Windows, this part of the step may not be necessary.)
b Enable “ Place volume icon in the taskbar ”.
c Click OK .
d Double-click the speaker icon on the taskbar.
2 Click Options Æ Properties .
3 Click the Recording button, enable all check boxes in the list box, then click OK .
4 For the Line In and/or Microphone controls, make sure the Volume slider
levels are okay (if you’re not sure, try half level), and the appropriate
Select
check box is enabled.
5 Click Options Æ Properties .
6 Click the Playback button, enable all check boxes in the list box, then click
OK .