User guide

Matrox M-Series – User Guide 3
Software available (for Windows 2000/XP/Vista)
 Matrox PowerDesk – to use your Matrox graphics hardware. Matrox provides 32-bit
and 64-bit versions of the display driver. Matrox makes new display drivers available on
the Matrox Technical Support Web site (www.matrox.com/graphics/support/drivers
).
 Other software – see the CD-ROM Readme file
Installation overview
To install your Matrox product:
1 Install the Matrox card – see “Hardware installation”, page 4.
2 Connect your monitors – see “Standard (ATX) connection setup”, page 8 or “Low-profile
connection setup”, page 11.
3 Install the software – see “Software setup”, page 15.
Note: If your Matrox product is already partially or fully installed on your computer, some
or all the installation information in this guide may not apply to you. However, this
information may be useful if you need to reinstall your Matrox product.