User guide

14 Matrox M-Series – User Guide

Step-by-step connection setup – Quad Display

1 Connect your quad-monitor

cable

Attach your quad-monitor cable to the

connector on the bracket of your Matrox

card. Make sure the connectors are properly

fastened.

2 Connect your monitors

If your monitor has a DVI connector,

connect your monitor cable directly to the

quad-monitor cable.

If your monitor has an HD-15 connector,

use a DVI-to-HD15 adapter included with

your product to connect your monitor cable

to your quad-monitor cable.

Make sure all connectors are properly

fastened.

Your Matrox card is now installed. Restart your computer and install your Matrox software (see

“Software setup”, page 15).

Quad-monitor

cable

Monitor connector

(HD-15)

Monitor connector (DVI)

Monitor

connector (DVI)

DVI-to-HD15

adapter

Note:

Monitors are numbered consecutively based on which

connector each is attached to. Numbering starts with the

primary display

– the one that first displays information

when you restart your computer. If another graphics card is

installed in your computer, display numbering may be

different