User guide

12 Matrox M-Series – User Guide

Connection overview – DualHead

Step-by-step connection setup – DualHead

1 Attach the dual-monitor cable

Attach your dual-monitor cable to the

connector on the bracket of your Matrox card.

Make sure the connectors are properly

fastened.

Monitor connector (DVI)

Monitor connector

(HD-15)

DVI-to-HD15

adapter

Dual-monitor cable

WA R N I NG :

To avoid damaging the LFH-60 connector on your dual-monitor cable or on

your graphics card, carefully insert the connector on your dual-monitor cable as straight

as possible into the connector on your graphics card. Specifically, inserting the connectors

into each other at an angle is likely to bend and damage the pins on the connector of the

dual-monitor cable.