User guide

Matrox M-Series – User Guide 9
3 Insert your Matrox card
a Position your Matrox card over the
expansion slot you’ve chosen.
b Push the card in firmly and evenly until
it’s fully seated in the slot.
c Secure the bracket of your Matrox card
to the computer frame.
Your Matrox card is now installed. Before restarting your computer , connect your monitor or
monitors (see “Connecting your graphics hardware”, page 12).
After connecting , restart your
computer and install your Matrox software (see “Installing your Matrox software”, page 19).
Securing the bracket of your Matrox card
Matrox M9140 only – To support the weight of your quad-monitor cable and avoid damaging your graphics
card, you also need to secure a washer to the bracket of your graphics card.
1 To secure the washer, slip it over the
monitor connector, then screw the
washer onto the bracket of your
graphics card.
WA R N I NG : Inserting your Matrox card
into the wrong type of slot could damage
your card, your computer, or both.
PCI Express card
PCI card
×16
×1
×4
×8
64-bit
32-bit