User guide
38 Matrox M-Series – User Guide
2
Select
Playback
and make sure all the devices you want to use are listed as working. If a
device is listed as not working, right-click the device icon and select
Enable
.
3
For each device you want to use,
double-click the device icon and
select
Levels
. Make sure the
volume slider value is okay and the volume button is enabled ( ). Click
OK
. (To test
the volume of a playback device, right-click the device icon in the
Playback
property
sheet and select
Test
.)
4
Select
Recording
and make sure all the devices you want to use are listed as working. If a
device is listed as not working, right-click the device icon and select
Enable
.
5
For each device you want to use, double-click the device icon and select
Levels
. Make
sure the volume slider value is okay (if you’re not sure, try a value of 50) and the volume
button is enabled ( ). Click
OK
. (To test the volume of a recording device, make sure
an audio source plugged into it and playing, then watch the volume meter next to the
audio device icon. The volume meter should be between 60 and 100%.)
4
Cause
The problem may be specific to the audio hardware of your computer.
1
Solution
For more information, see the documentation for the audio hardware of your computer.
Note:
To see all your devices, right-click anywhere on the property sheet and make sure
Show disabled devices
and
Show Disconnected Devices
are enabled.
Note:
To see all your devices, right-click anywhere on the property sheet and make sure
Show disabled devices
and
Show Disconnected Devices
are enabled.