User guide

Matrox M-Series – User Guide 17
Connecting three monitors
The following explains how to connect three monitors to your Matrox product.
1 Connect the first monitor
If your monitor has a DisplayPort
connector, use a Mini DisplayPort to
DisplayPort adapter included with your
product to connect your monitor cable to
the Mini DisplayPort connector labeled
1 on
the bracket of your Matrox card.
If your monitor has a DVI connector, use a
DisplayPort to DVI-D adapter (sold
separately) to connect your monitor cable to
the Mini DisplayPort to DisplayPort
adapter.
2 Connect the other monitors
Repeat step 1 for each monitor you want to connect.
Your Matrox card is now installed. Restart your computer and install your Matrox software (see
“Installing your Matrox software”, page 19).
WA R N I NG : To av oid da m a g i ng the
DisplayPort connector on your DisplayPort
monitor cable or on your graphics
hardware, carefully remove the DisplayPort
cable by pressing the latch on the top of the
DisplayPort connector while removing the
connector.
Mini DisplayPort
to DisplayPort
adapter
DisplayPort
connector
DisplayPort to DVI-D
adapter
Monitor
connector (DVI-D)