User guide

14 Matrox M-Series – User Guide
If your second monitor uses an HD-15
connector, use a DVI to HD-15 adapter
included with your product to connect your
monitor to the secondary connector.
Your Matrox card is now installed. Restart your computer and install your Matrox software (see
“Installing your Matrox software”, page 19).
Connecting your low-profile graphics hardware
Connecting two monitors
The following explains how to connect two monitors to your Matrox product.
1 Attach the dual-monitor cable
Attach your dual-monitor cable to the
connector on the bracket of your Matrox card.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
Note: To connect a monitor to your Matrox
product, your monitor must have a DVI or
an HD-15 connector.
Some monitors with DVI connectors
support both digital and analog input. If
you’re using one of these monitors with your Matrox product, make sure it’s configured to
use the correct type of input. For more information, see your monitor documentation.
HD-15 connector
(analog)
DVI connector
(DVI-I: analog/digital)
Dual-monitor
cable