User guide

10 Matrox M-Series – User Guide
2 Make sure the washer lies flat against the
frame of your computer. Two washers
are provided with your Matrox product.
Use the small washer if the large washer
doesn’t fit on the frame of your
computer.
Replacing brackets on a low-profile graphics card
Most Matrox low-profile graphics cards ship with ATX brackets compatible with most systems. The
following explains how to change brackets on your Matrox product.
1 Remove the current bracket from your
Matrox graphics card by removing the
screw on the back of the graphics card,
then the nuts on either side of the
monitor connector.
2 Attach and fasten the new bracket with
the two nuts you just removed.
Washer
Graphics
card
ATX bracket
Low-profile bracket