User guide

Matrox Extio Series – User Guide 29
Options
This screen allows you to change the options of your setup utility.
Show temperature in ºC
Enable or disable the listing of temperatures in the Info screen in
Celsius instead of Fahrenheit.
Enable system restart
Enable or disable the use of the keyboard to restart your system
remotely after shutting it down.
This feature requires that power be supplied to the +3.3V (Aux)
connector of your interface card (see the
Info screen for your
interface card). Certain systems may not support this feature.
Change current unit
Change the Extio unit you want to configure. This option is
unavailable if only one unit is connected.
Change password
Change your current password. The default password is admin .
You have three attempts to enter the correct password. If you
exceed your three attempts, you need to restart your Extio unit
to try again or to save your changes.
Save and exit
Save your current settings and exit the setup utility. This is the
same as pressing [Esc]. You need to enter the password to save
your changes. The default password is admin .
Cancel and exit
Cancel and discard all changes made to your Extio unit and its
associated interface card, and exit the setup utility.
Note: If you lose your password, contact your vendor for information on resetting your
password.