User guide

14 Matrox Extio Series – User Guide
3 Connect your monitors
Connect your monitors to the monitor
connectors (starting with connector
1 ) at
the back of your Extio unit.
If your monitor has a DisplayPort
connector, connect your monitor directly to
a DisplayPort connector at the back of your
unit.
If your monitor has a DVI-D connector, use
a DisplayPort to DVI-D adapter to connect
your monitor cable to the DisplayPort
connector at the back of your unit.
4 Connect your power supply
Attach one end of the power supply cable
provided with your Matrox product to the
power connector on your Matrox product.
Plug the power supply cord into an electrical
outlet.
Monitor
connector
(DisplayPort)
Monitor
connector
(DVI-D)
DisplayPort to
DVI-D adapter
WA R N I NG : To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your Matrox product,
carefully remove the DisplayPort cable by
pressing the latch on the top of the DisplayPort
connector while removing the connector.
Power
supply
cable