User guide

12 Matrox Extio Series – User Guide
Back – Extio F2208
Back – Extio F2408
Step-by-step connection setup
1 Connect your USB cable
Connect one end of your USB cable
included with your product to the USB
connector on your interface card. Connect
the other end of your cable to a USB
connector on the motherboard of your
system. Make sure your connectors are
properly connected.
Power connector Monitor connectors
(DisplayPort)
Optical
connector
Line-out
connector
USB connectors
(Version 2.0)
Power connector Monitor connectors
(DisplayPort)
Optical
connectors
Line-out
connector
USB connectors
(Version 2.0)
USB cable
Interface card
Note: To use a keyboard with your unit before your operating system starts, the USB cable
must be connected from your interface card to your computer. Also, to use the audio
hardware of your unit after your operating system has started, this cable must be connected.