User guide

10 Matrox Extio Series – User Guide
3 Insert your Matrox card
a Position your Matrox card over the
expansion slot you’ve chosen.
b Push the card in firmly and evenly until
it’s fully seated in the slot.
c Secure the bracket of your Matrox card
to the computer frame.
Your Matrox card is now installed.
Before restarting your computer, connect your your interface card
and your monitors to your Extio unit (see “Connecting your Extio unit”, page 11). Connect your
Expander unit (if present) to your Extio unit (see “Connecting your Expander unit”, page 18).
After
connecting
, you can restart your computer and install your Matrox software (see “Installing your
Matrox software”, page 20).