User guide

49
Scaling and positioning your output
The following table lists the default keyboard shortcuts for the Convert DVI
actions
:
6 Click OK to save the changes.
Scaling and positioning your output
If you’re outputting the entire Convert DVI desktop, no matter which Convert
DVI hardware you’re using (Convert DVI or Convert DVI Plus), the output
content can be upscaled or downscaled in relation to the specified video output
format. If you’re using the region of interest feature and are outputting a specific
area of the Convert DVI desktop, Convert DVI Plus users can upscale or
downscale the output content, while Convert DVI supports downscale only.
If using Convert DVI Plus, you can position your output content anywhere on the
video output. If you’re not using Convert DVI Plus, your output content will
always be centered on the video output. The Convert DVI scaling window also
shows a live preview of the video output. Depending on your Convert DVI
hardware, some of the options described in this section may not be available, and
may not appear exactly as shown.
Action Default shortcut
Apply CTRL+SHIFT+F1
Enable/disable region of interest CTRL+SHIFT+F2
Show/hide region of interest CTRL+SHIFT+F3
1:1 output scaling option CTRL+SHIFT+F4
Allow clicking through selection window CTRL+SHIFT+F5
Freeze/unfreeze output
1
1
Available for Convert DVI Plus only.
CTRL+SHIFT+F6
Enable/disable the region of interest
Snap-to-window option
1
CTRL+SHIFT+F7