User guide

34
Chapter 4, Configuring Matrox Convert DVI
4 If you’re genlocking to an external source, from the Genlock Video Format
menu, select your external genlock source’s video format.
¡ Important To ensure good output results, make sure that your external
genlock source’s video format is compatible with the Convert DVI video
output format.
5 If you’re genlocking to an external source, click Apply if required, and then
use the horizontal and vertical settings under
Video Output Timing Offset
to adjust the timing of the video output relative to your external genlock
source. This lets you compensate for cable delays within your system. Click
the button to return a slider to its default position.
¦NoteTo automatically apply the timing offset settings, and to view the
timing offset adjustments live on your video output, make sure to
Apply the
genlock settings before adjusting the timing offset. If you do not
Apply the
genlock settings before, the timing offset settings will not be automatically
applied, and any adjustments you make will not be live on your video output.
6 Click Apply for the changes to take effect. The Apply button is active only
when a change is made to the current genlock settings.
¥Tip Press CTRL+SHIFT+F1 to apply changes (see “Managing keyboard
shortcuts” on page 48).