User guide

33
Specifying your genlock settings
Specifying your genlock settings
This section details how to specify your Convert DVI genlock settings.
¦NoteYou must click Apply for the changes to the genlock settings to take
effect.
1 Open the Matrox Convert DVI Control Panel.
2 Click the Genlock tab.
3 From the Analog Genlock Source menu, select one of the following:
$ Internal Select this to genlock to Convert DVI’s internal reference
signal. Select this option only if you don’t have an external sync generator
connected to the REF IN on your Convert DVI.
$ External Select this if you connected an external sync generator to the
REF IN on your Convert DVI.
The status of your genlock source will be displayed as
Locked or Not
Locked
to indicate whether or not Matrox Convert DVI is presently locked
to your genlock source.