User guide

31
Specifying your output settings
can also position the file manually by using your mouse to drag the graphic
to the desired position.
8 For Matrox Convert DVI Plus only, click Proc Amps to adjust the Hue,
Chroma, Brightness, and Contrast levels of your video output. Click
Save as Default to save the current settings as the default settings, which
overrides the previously saved settings. Click
Load Default at any time to
load the latest default settings. Click
OK when done.
9 Under Audio Output, select Embed audio in SDI output if you want the
audio from your computer to be embedded in Convert DVI’s SDI output
signal. Since Convert DVI supports only one stereo pair (pair 1/2) from your
computer on input, and Convert DVI’s SDI output supports eight audio
channels (four stereo pairs), you must select the SDI stereo pair(s) that will
be used to output the audio from your computer. The stereo pair from your
computer is duplicated on every selected SDI stereo pair. For example, if
3-4
and
5-6 are selected, the stereo pair from your computer will be outputted on
SDI stereo pairs 3/4 and 5/6. The SDI stereo pairs that are not selected are
muted.
10 Click Apply for the changes to take effect. The Apply button is active only
when a change is made to the current output settings.