User guide

29
Specifying your output settings
Specifying your output settings
This section details how to specify your Convert DVI video and audio output
settings. Depending on your Convert DVI hardware, some of the output options
described in this section may not be available, and may not appear exactly as
shown.
¦NoteYou must click Apply for the changes to the output settings to take
effect.
1 Open the Matrox Convert DVI Control Panel.
2 Click the Output tab.
3 From the Output Format list, select the video format that you want for
Convert DVI’s video output. However, your video output content, be it the
entire Convert DVI desktop or a selected region of interest (see “Specifying
your region of interest settings” on page 35), may not necessarily be
displayed at this resolution. The scaling factor selected for your output
content determines how it’s displayed relative to the selected video output
format (see “Scaling and positioning your output” on page 49).