User guide

19
Configuring your display settings for use with Convert DVI
desktop on 1 and 2 (or whichever combination represents your primary
display and Convert DVI display).
c Duplicating your Convert DVI’s display To make Convert DVI your
primary display, click the monitor icon that represents your Convert DVI
(click
Identify if you’re not sure), select Make this my main display,
and then click
Apply. Then, from the Multiple displays list, select
Duplicate these displays.
¦NoteIf Windows doesn’t provide settings for extending or duplicating your
displays, you’ll need to use your display card’s configuration utility to
configure your display settings. Refer to your display card’s documentation
for more information.
3 Click the monitor icon that represents your Convert DVI, and from the
Resolution list, set your desired Convert DVI desktop resolution according
to how you want to use Convert DVI:
$ If you want to output a specific area of your Convert DVI desktop (see
“Specifying your region of interest settings” on page 29), it is
recommended that you set your Convert DVI desktop resolution to the
highest resolution supported by both your display card and Convert DVI.
$ If you want to output your entire Convert DVI desktop, it is recommended
that your Convert DVI desktop resolution and video output format are
close in size. For example, if you want to output NTSC video, set your
Convert DVI desktop resolution to 800 ×600 for best results.
¡ Important Before using Convert DVI in stand-alone mode, make sure to
set your desired Convert DVI desktop resolution to the resolution of the DVI
input device that will be connected to Convert DVI in stand-alone mode. For
more information on stand-alone mode, see “Programming Convert DVI to
stand-alone mode” on page 33.