User Manual

Matrox C-Series – User Guide 9
2 Attach and fasten the new bracket with
the two screws you just removed.
Installing multiple graphics cards
You can install up to either two (2) Matrox C680 graphics cards or two (2) Matrox C420 graphics
cards in your system.
Interconnecting multiple graphics cards (Framelock)
Matrox C680 only – If you have multiple Matrox C680 graphics cards installed in your
system, you can framelock all your outputs by interconnecting your graphics cards with a
ribbon cable (sold separately).
Attach the ribbon cable to the connector
labeled
GEN0 on one card and to the
connector labeled
GEN0 on the next
graphics card.
Low-profile bracket
WA R N I NG : To avoid damaging your
cards, always insert your card as straight as
possible into the slot. Don’t rock the card
from side to side. If you meet resistance,
don’t force the card into the slot.
GEN0
GEN1