User Manual

Matrox C-Series – User Guide 5
Overview
Thank you for purchasing a Matrox C-Series graphics card. This is a high-performance graphics card
that supports PCIe® (PCI Express®) ×16 compliant systems and multi-monitor setups.
System requirements
Installation overview
To install your Matrox product:
1 Install your Matrox graphics hardware – see page 6.
2 Connect your monitors – see page 11.
3 Install your Matrox software – see page 13.
Hardware
 Minimum 2 GB RAM
 Motherboard with available PCI Express ® ×16 slot
 Internet access for software installation
Software
 Windows ® 10 (32-bit, 64-bit)
 Windows ® 8.1 (32-bit, 64-bit)
 Windows ® Server ® 2012 R2 (64-bit)
 Windows ® Server ® 2008 R2 (64-bit)
 Windows ® 7 (32-bit, 64-bit)
 Windows ® Embedded Standard 7 (32-bit, 64-bit)
Monitor
 DisplayPort™
 DVI
*
 HDMI
®*
* Supported using identical third-party active adapters (sold separately).
Note: If your Matrox product is already partially or fully installed on your computer, some
or all the installation information in this guide may not apply to you. However, this
information may be useful if you need to reinstall your Matrox product.