User guide

80
Chapter 8, Defining Your Adobe Premiere Pro Settings
Specifying your video output settings (X.linkHD)
You can specify various settings to configure your video output signals from the
X.linkHD breakout box, such as to adjust the gain of your component video, and
adjust the horizontal delay of your SDI video.
°To specify your video output settings:
1 Choose Project > Project Settings > General and click the Playback
Settings
button.
2 Click the Video Output tab.
3 Under Master Output Format, select the video format you want for all
video outputs from the X.linkHD breakout box. Depending on your project’s
video format, you may not be able to change the master output format.
4 If the Aspect Ratio Conversion list is available, such as when the video
output for an HD project is downconverted to NTSC or PAL, select one of
the following settings for the video output:
$ 16x9 Letterbox Outputs the widescreen 16:9 picture in letterbox mode
by adding black bars at the top and bottom of the picture for display on a
standard 4:3 television screen.
$ Anamorphic Outputs the widescreen 16:9 picture as horizontally
compressed 4:3 video, which retains the picture’s full vertical resolution
for display on a widescreen television. To display the video with the correct
proportions on an NTSC or PAL monitor, select the 16:9 display setting on
the monitor.
Axio Installation and User Guide.book Page 80 Monday, July 14, 2008 8:00 AM