User guide

77
Defining your General settings
Premiere Pro and open your project, both the audio conform and .pek files
will be created.
12 Under Sequence Playback, clear Postroll after stop if you don’t want any
postroll when you stop the playback of a sequence. When you do this, the
playback will stop at the current-time indicator, and you’ll see a slight jump
in the video output when the playback stops (but the correct frame will be
displayed).
13 Under Multi-camera Preview, select Show only active camera on
video monitor
if you’d like to see only the active camera on your video
monitor when the Multi-Camera Monitor is enabled. To see all the camera
previews on your video monitor, make sure this option is cleared.
¦NoteWhen you select Show only active camera on video monitor, any
non-realtime segments previewed on the Multi-Camera Monitor will display
as black video on your video monitor. On an Axio LE system, selecting this
option may result in decreased realtime performance during multi-camera
editing.
14 Under Memory Usage, select Optimize memory usage to reduce the
amount of system memory that Matrox Axio allocates to work with your
project. Although this optimizes memory usage, the changes in memory
management could affect realtime performance depending on the content of
your project. If you experience dropped frames, try clearing this option to
see if the performance improves.
15 Under Matrox Axio Splash Screen, select Disable splash screen
display
if you don’t want the Matrox Axio splash screen to be displayed on
your computer and video monitors when you first open your project after
starting Premiere Pro. Select
Disable splash screen audio if you’d like to
disable the audio associated with the Matrox Axio splash screen.
16 Click OK to save your settings and return to the Project Settings dialog
box.
Axio Installation and User Guide.book Page 77 Monday, July 14, 2008 8:00 AM