User guide

44
Chapter 5, Connecting External Devices to Matrox Axio LE
Connect your X.linkLE balanced analog audio
cable to the audio cable bracket
1 Connect one end of the X.linkLE balanced analog audio cable to the Analog
Audio connector at the back of your X.linkLE breakout box. Tighten the
thumb screws until snug to ensure a stable connection.
2 Attach the opposite end of the X.linkLE balanced analog audio cable to the
balanced analog audio cable connector (labeled A) on your installed Axio
LE audio cable bracket. Tighten the thumb screws until snug to ensure a
stable connection.
²Caution Use extra care when attaching the cable to its respective connector
(bent pins can cause your Matrox Axio LE system to not perform properly).
Also, do not bend the attached cable too sharply. Excessive bending or flexing
can damage internal, shielded wires.
Analog Audio
A
X.linkLE balanced analog
audio cable
Back of X.linkLE breakout
box (partial view)
Axio LE audio cable
bracket
Axio LE balanced analog
audio cable connector (A)
Axio Installation and User Guide.book Page 44 Monday, July 14, 2008 8:00 AM