User guide

Connect your X.link breakout box to your computer

3 Repeat steps 1 and 2 with the second ferrite bead at the opposite end of the

X.link cable.

Connect your X.link breakout box to your

computer

1 Connect one end of the X.link cable to the X.link connector on the backside

of your X.link breakout box. Tighten the thumb screws until snug to ensure a

stable connection.

2 Attach the opposite end of the X.link cable to the bracket connector on the

backplate of your installed X.io card.

²Caution Use extra care when attaching the X.link connectors (bent pins can

cause your Matrox Axio system to not perform properly). Also, do not bend

the attached cable too sharply. Excessive bending or flexing can damage

internal, shielded wires.

X.link cable

connector

X.link cable

X.io card

Axio Installation and User Guide.book Page 25 Monday, July 14, 2008 8:00 AM