User guide

14
Chapter 2, Installing Your Matrox Axio HD or SD Hardware
Connect the internal power supply cable to your
X.io card
Your X.io card requires power from your computer’s internal power supply. An
internal power supply cable is provided with Matrox Axio to connect your X.io
card to your computer’s internal power supply.
¦NoteThe connector located between the X.link breakout box connector and
the LED display on your X.io card is not used.
When you’ve completed the installation of your Axio card set and turned on your
computer, an LED display on the backplate of your X.io card will light up,
indicating that the internal power supply is properly connected.
LED display
Attach the small end of your in-
ternal power supply cable to the
8-pin male connector located
near the rear of your X.io card.
X.link breakout box
connector
Internal
power
supply
cable
X.io card
Axio Installation and User Guide.book Page 14 Monday, July 14, 2008 8:00 AM