User guide

120
Chapter 8, Defining Your Adobe Premiere Pro Settings
connected to the composite video input on your X.linkSD breakout box,
select
Composite.
9 Click the Audio Capture Settings tab.
10 From the Input Source list, select the audio source type corresponding to
the device to which the microphone is connected. For example, if the
microphone is connected to an XLR device on X.linkSD, select
XLR
(balanced analog)
.
11 Test the audio input levels by speaking into the microphone and use the VU
meters in the
Audio Input Levels window to check the audio input levels.
While speaking into the microphone, watch the input levels and adjust the
audio level on your source device if needed.
¦NoteThe Meter Input(s) Only option is not supported in Adobe Premiere
Pro’s Audio Mixer when using the Matrox ASIO driver as the default device.
12 Click OK to save your settings, then click OK to close the Project Settings
dialog box.
Recording your voice-over
You use Adobe Premiere Pro’s Audio Mixer to record your voice-over. For
further information on using the Audio Mixer, see your Adobe Premiere Pro
documentation.
1 Choose Window > Audio Mixer, then select the sequence in which you
want to record your voice-over (for example,
Window > Audio Mixer >
Sequence 01
).
2 Position the current-time indicator in the Timeline panel where you want the
voice-over to begin.
Axio Installation and User Guide.book Page 120 Monday, July 14, 2008 8:00 AM