User guide

105
Defining your Capture settings
Specifying your audio monitoring settings
(X.linkHD and X.linkSD)
Matrox Axio HD and SD let you customize your settings for monitoring audio
during capture, such as to select the particular output channels on which you
want to monitor your audio when capturing embedded SDI audio. Only audio
input channels that are to be captured to a .wav file can be monitored.
°To specify your settings for monitoring audio during capture:
1 Choose Project > Project Settings > Capture.
2 From the Capture Format list, select Matrox AVI.
3 Click the Configure button, then click the Audio Monitoring tab.
¦NoteThe AES/EBU channels are not available on X.linkSD.
4 Under Input Channels, each speaker button represents a stereo pair or two
mono channels that you’re capturing as specified on the
Audio Capture
Settings
page (see “Specifying your audio capture settings” on page 101).
For example, if you want to monitor your first captured stereo or mono
channels on the left and right analog audio outputs, drag the button to
Analog L/R.
5 To mute audio monitoring for a particular channel, click its speaker button.
To re-enable monitoring, you must assign an input channel to it.
6 Under SDI, you can assign input channels to a maximum of four SDI audio
pairs (two pairs from any two groups) for monitoring. To assign an input
Axio Installation and User Guide.book Page 105 Monday, July 14, 2008 8:00 AM