User guide

94
Chapter 8, Defining Your Adobe Premiere Pro Settings
Specifying your genlock settings
You can select the source to which you want to genlock all devices connected to
your Matrox Axio system, as well as adjust the timing settings for all video
outputs from Matrox Axio.
°To specify your genlock settings:
1 Choose Project > Project Settings > General and click the Playback
Settings
button.
2 Click the Genlock tab.
3 From the Genlock Source list, select one of the following:
$ Internal Genlock to Matrox Axio’s internal reference signal. Select this
option only if you don’t have an external sync generator or other reliable
external video sync source.
$ Black Burst Broadcast Quality Genlock to an external sync generator
connected to REF IN on your X.link breakout box.
$ Black Burst VTR Quality Genlock to your analog source VTR
connected to REF IN on your X.linkSD breakout box. (This option is not
available on X.linkHD or X.linkLE.)
$ SDI Video Genlock to your SDI video source. Use this option only if
your SDI video source is very stable (that is, it has a built-in TBC). (This
option is not available on X.linkLE.)
Axio Installation and User Guide.book Page 94 Monday, July 14, 2008 8:00 AM