User guide

93
Defining your General settings
Displaying settings for 5.1 surround mapping (X.linkLE)
Matrox Axio LE lets you display 5.1 surround mapping settings that show which
channels are used to output your audio when playing back 5.1 surround tracks in
your sequence.
°To display your 5.1 surround mapping settings:
1 Choose Project > Project Settings > General and click the Playback
Settings
button.
2 Click the Audio Output tab, then click the 5.1 Surround Mapping tab.
This page shows that when playing back 5.1 surround tracks, audio is output as
follows:
• Front left and right surround channels are output to the first embedded SDI
audio output pair and the first analog audio and AES/EBU output pairs
(ANALOG AUDIO OUT 1 and OUT 2 and AES/EBU OUT 1/2) on
X.linkLE.
• Rear left and right surround channels are output to the second embedded SDI
audio output pair and the second analog audio and AES/EBU output pairs
(ANALOG AUDIO OUT 3 and OUT 4 and AES/EBU OUT 3/4) on
X.linkLE.
• Center and subwoofer surround channels are output to the third embedded
SDI audio output pair and the third analog audio and AES/EBU output pairs
(ANALOG AUDIO OUT 5 and OUT 6 and AES/EBU OUT 5/6) on
X.linkLE.
Axio Installation and User Guide.book Page 93 Monday, July 14, 2008 8:00 AM