User guide

86
Chapter 8, Defining Your Adobe Premiere Pro Settings
Specifying advanced video output settings (X.linkLE)
You can specify advanced video output settings for X.linkLE, such as to make
horizontal delay and SC/H phase adjustments.
°To specify your advanced video output settings:
1 Choose Project > Project Settings > General and click the Playback
Settings
button.
2 Click the Video Output tab, then click the Advanced tab.
3 Use the Horizontal Delay sliders to advance or delay the horizontal timing
of your SDI and analog video outputs.
4 Select Allow Super White to allow the highest luminance level of your
video output to exceed the standard maximum white level. Select
Allow
Super Black
to allow the lowest luminance level of your video output to fall
below the standard black level.
¦NoteThe Allow Super Black and Allow Super White options affect both
your SDI and analog video outputs. Super white and super black should not
be allowed when producing your final video production for broadcast.
5 Use the SC/H Phase slider to advance or delay your analog video output’s
subcarrier phase with respect to the horizontal sync of your genlock source
(for composite video only).
6 Click OK to save your settings and return to the Project Settings dialog
box.
Axio Installation and User Guide.book Page 86 Monday, July 14, 2008 8:00 AM