User guide

30 Matrox Avio Series – User Guide
Power consumption and supply voltage
Audio
Notes
 Your Matrox product is 100% VGA compatible and supports all VESA® standards: VBE
3.0 (Super VGA modes), DPMS (energy saving), DDC-2B (Plug-and-Play monitor), and
DDC-CI.
Avio F125/F120 unit
Power requirements
12V DC, maximum 2.5 A
(2.5 A fuse for overcurrent protection)
Power connector DIN 4 female (4-pin)
External power supply
Input AC voltage range 100 to 240 V AC
Input frequency 50-60 Hz
Input connector IEC 60320-C14
Output voltage +12 V DC
Output connector DIN 4 male (4-pin) with lock
Maximum power consumption 30 W
Stereo audio 2 channel
Bits per sample 24 bits per channel, 2 channel (Left and Right)
Sampling rate 96 kHz
Audio connector type 3.5 mm stereo audio jacks
Stereo crosstalk -80 dB
Full-scale voltage 1 V
RMS
(2.83 V
P-P
)
Minimum impedance 10k Ohms
Total Harmonic distortion and Noise
(THD+N)
< -80 dB
Signal-to-noise ratio (SNR) >76 dBA