User guide

Matrox Avio Series – User Guide 27
Settings
This menu allows you to view the following:
 Disable the OSD buttons on one or both of your units. If you disable the OSD buttons,
you can access the OSD menu by quickly pressing [Reset] with the tip of a paperclip.
 Avio F125 only – Disable HDCP. For more information on HDCP support, see “HDCP
support with Matrox Avio F125”.
 Reset all options and settings of your units.
 Restart your units.
 Standardize the firmware of your units by updating the firmware of one unit with the
firmware of the other unit.
 Force your output to use an analog or a digital signal.
 Update the firmware of your units with a firmware version stored on an external source
connected to the mouse USB connector. You can also restore the firmware to the factory
default version for your unit.
Note: Firmware mismatch isn’t supported. Your Avio transmitter and receiver units must
be using the same firmware package version.