User guide

20 Matrox Avio Series – User Guide
Description of LEDs
The LEDs on your Matrox unit provide status information on your unit and its optical connection.
The following describes the different LEDs:
If both LEDs are flashing green, a firmware update is in progress. If both LEDs are flashing red, a
firmware update error was detected.
Green
Flashing
Green/Orange
Red No LED (black)
Power and
status
Unit is
operational.
Firmware
mismatch
*
.
* For more information on how to update your firmware, see “Settings”, page 27.
Error detected. No power.
Green Orange
Flashing
Orange
Red
Optical
connection
Optical
connection
active.
No transceiver
detected or no
optical
connection
established.
Firmware
update in
progress.
No transceiver
detected or no
optical
connection
established.
Major
communication
error.